Washer generator

Set the outer diameter, inner diameter and thickness for a custom washer or precision shim. The DXF is ready for laser cutting shim stock.

—

Drag to rotate, scroll to zoom

Loading 3D viewer…

Envelope (mm): —
Volume: —
Est. mass: —
Material: —

Notes for washers

Type "M8 washer" for a standard ISO 7089 washer (Ø8.4 × Ø16 × 1.6 mm), then "centre hole 9" or "bigger hole" to adjust it.
For shims, use the DXF and cut from shim stock; set a custom tolerance on the drawing.
Large thin washers print poorly on FDM; cut them from sheet where possible.

Stainless, brass and steel washers (render)

Other categories

Mounting plates

Rectangular plate with rounded corners and a hole pattern.

Length, width, thickness, corner radius, hole patterns

Blocks

Rectangular block with through holes in any pattern.

Length, width, height, hole patterns

Spacers

Round spacer / standoff with a clearance bore.

M2 to M20 clearance bores, any length

Threaded posts

Round or hex standoff with tapped holes or threaded studs at each end.

M2 to M24 threads, tapped or stud ends, round or hex

Made in the Mechform Factory, soon

Any part you configure will be made in our AI-run automated factory, 3D printed or machined, with the price and lead time worked out from the model itself. Ordering isn't open yet.