1. Home
  2. Components
  3. Mounting plates

Mounting plate generator

Set the length, width, thickness, screw size and hole positions. Holes are sized to ISO 273 clearance, ready for laser cutting, CNC or 3D printing.

—
Drag to rotate, scroll to zoom
Loading 3D viewer…
Envelope (mm)
—
Volume
—
Est. mass
—
Material
—

Notes for mounting plates

  • Place holes by typing: "holes 10mm from the edges", "3x2 grid 30mm apart", "5 holes along the bottom edge" or "holes at (20,20), (100,60)".
  • Use the DXF for laser or waterjet cutting: it is the exact outline at 1:1 in millimetres.
  • For M5 screws the medium clearance hole is Ø5.5 mm; choose ISO 2768-f in the title block if hole positions are critical.
  • Technical data: Metric clearance hole sizes
  • Technical data: Tap drill sizes (metric coarse)
Machined aluminium mounting plate with countersunk holes, slots and a centre bore
Machined aluminium mounting plate with countersunk holes, slots and a centre bore (render)

Other categories

Blocks

Rectangular block with through holes in any pattern.

Length, width, height, hole patterns

Spacers

Round spacer / standoff with a clearance bore.

M2 to M20 clearance bores, any length

Threaded posts

Round or hex standoff with tapped holes or threaded studs at each end.

M2 to M24 threads, tapped or stud ends, round or hex

Washers

Flat washer or shim with any OD, ID and thickness.

Outside and inside diameter, thickness

Made in the Mechform Factory, soon

Any part you configure will be made in our AI-run automated factory, 3D printed or machined, with the price and lead time worked out from the model itself. Ordering isn't open yet.