Block generator

Set length, width and height, then add through holes: a centre hole, a symmetric pattern, a grid, a row or exact positions. Handy for spacer blocks, jigs and fixtures.

—

Drag to rotate, scroll to zoom

Loading 3D viewer…

Envelope (mm): —
Volume: —
Est. mass: —
Material: —

Notes for blocks

Type "block 60x40x20 with 4 M5 holes 8mm from the edges" to set everything in one go.
Exact positions work too: "holes at (10,10) and (50,30)", measured from the bottom-left corner of the plan view.
For machined blocks, ISO 2768-m is a sensible general tolerance.
Technical data: Metric clearance hole sizes
Technical data: Tap drill sizes (metric coarse)

Black anodised aluminium block with a pocket and two tapped holes (render)

Other categories

Mounting plates

Rectangular plate with rounded corners and a hole pattern.

Length, width, thickness, corner radius, hole patterns

Spacers

Round spacer / standoff with a clearance bore.

M2 to M20 clearance bores, any length

Threaded posts

Round or hex standoff with tapped holes or threaded studs at each end.

M2 to M24 threads, tapped or stud ends, round or hex

Washers

Flat washer or shim with any OD, ID and thickness.

Outside and inside diameter, thickness

Made in the Mechform Factory, soon

Any part you configure will be made in our AI-run automated factory, 3D printed or machined, with the price and lead time worked out from the model itself. Ordering isn't open yet.